Specificaties
| Connection Inlet Flange | Edwards EHVI (12 x 20.60 mm holes on 686.0 PCD) |
| Connection vacuum outlet flange | Edwards EHVI (4 x 16.70 mm holes on 235.0 PCD) |
| Cooling Method | Water Cooling |
| Pressure Ultimate | 0.010 |
| Voedingsspanning | 3Ph 415V 50/60Hz |
| Totaal Vermogen Nominaal | 22500.00 |
30B5M - Diffusion Vapour Booster Pump, 3Ph 415V 50/60Hz
Variant
Bekijk de onderstaande varianten om het product te vergelijken
| Korte beschrijving | Onderdeelnummer | Voedingsspanning |
|---|---|---|
| B06407200 | 3Ph 400V 50/60Hz | |
| B06407220 | 3Ph 400V 50/60Hz | |
| B06407380 | 3Ph 380V 50/60Hz | |
| B06407400 | 3Ph 400V 50/60Hz | |
| B06407415 | 3Ph 415V 50/60Hz | |
| B06407440 | 3Ph 400V 50/60Hz | |
| B06407460 | 3Ph 400V 50/60Hz | |
| B06407480 | 3Ph 400V 50/60Hz |
Diffusion Pumps
Vacuum diffusion pumps are essential for creating high-vacuum environments in various industrial and research applications. They operate by heating a special lubricant (often silicone oils) to produce a high-speed jet of vapour, which directs gas molecules towards the pump’s exhaust. This process allows the pump to achieve very low pressures. They require a mechanical fore vacuum pump to operate.
Vapour Booster Pumps
Vacuum vapour booster pumps are designed to enhance the performance of vacuum systems by providing high pumping speeds at intermediate pressures, bridging the gap between mechanical boosters and traditional diffusion pumps. These pumps work by using vapour jets to capture and compress gas molecules, effectively increasing the overall efficiency of the vacuum system.
30B5M
The Edwards 30B5M vapour booster pumps offer higher pumping speeds, of up to 15000 l/s at pressures intermediate between mechanical boosters and diffusion pumps. Vapour boosters from Edwards have been proven in the field for over 30 years. With a constant program of updates and modernisation, with input from OEMs and end users, combined with inherent reliability, ease of use and tolerance to various inlet and exhaust pressures they have been used extensively in metallurgy and coating industries as well as other specialist applications.
Features and Benefits
- Higher Pumping speed in mid vacuum range
- Simple to operate and long service life
- Suitable for harsh duties as they are tolerant to dust and dirt
- Industry proven with large installed base
General Product Information
| Connection Inlet Flange | Edwards EHVI (12 x 20.60 mm holes on 686.0 PCD) |
| Weight | 620.00 |
| Connection vacuum outlet flange | Edwards EHVI (4 x 16.70 mm holes on 235.0 PCD) |
| Leak Rate | 1.000 × 10⁻⁶ |
| Power Supply Phase | 3-Ph |
| Voedingsspanning | 3Ph 415V 50/60Hz |
| Dimension Length | 2.35 |
| Voedingsfrequentie |
50 Hz
60 Hz |
| Dimension Height | 3.27 |
| Dimension Width | 0.965 |
| Cooling Method | Water Cooling |
| Connection Cooling | 1" BSPP (G) Female |
| Aansluitflens Inlaat / Uitlaat | Edwards EHVI (12 x 20.60 mm holes on 686.0 PCD) / Edwards EHVI (4 x 16.70 mm holes on 235.0 PCD) |
| Dimensie Opmerkingen | The dimensions length, width and height try to describe the outer shape of this particular product in its typical orientation when standing on the ground. We always recommend checking the detailed dimensions given in 2D drawings in the instruction manual or the 3D shapes given in 3D models. |
Performance Data
| Totaal Vermogen Nominaal | 22500.00 |
| Totaal Vermogen Nominaal @60Hz | 22500.00 |
| Totale Vermogen Nominaal @50Hz | 22500.00 |
| Pressure Ultimate | 0.010 |
| Vermogen bij Atmosfeer Continu | 22500.00 |
| Pumping Speed Air Nitrogen (@50Hz or max @default setting) | 12.50 |
| Warm Up Time | 3600.00 |
| Pumping Speed Helium < 10-4 mbar | 15.00 |
| Maximale Drukondersteuning | 600.00 |
| Pumping Speed Air Nitrogen < 10-4 mbar | 12.50 |
| Maximaal Vermogenverbruik | 22500.00 |
Operation Conditions - Limitations
| Inlaat Absolute Druk Continu Max | 1.300 × 10⁵ |
| Altitude Max | 1000.00 |
| Oil Capacity Max | 0.055 |
| Druk Absoluut Uitlaat Continu Max | 600.00 |
Environmental Conditions
| Temperature Ambient Operation Max | 313.15 |
| Temperature Ambient Storage Min | 293.15 |
| Temperature Ambient Storage Max | 303.15 |
Material of Construction
| Materiaal van Constructie | Zacht staal, Fluoroelastomeer, Nitril, Koper, Aramidevezel in nitrilrubber bindmiddel |
| Materiaal Blootgesteld aan Vacuüm | Zacht staal, Fluoro-elastomeer |
| Materiaal rotor | Mild Steel Ni plated |
| Materiaal stator | Mild Steel Ni plated |
Classification
| Classification Product Pressure Range | High Vacuum: 1·10⁻³ - 1·10⁻⁷ mbar |
| Classification High / Medium / Rough Vacuum pump | High Vacuum Pump |
| Classification Dry or Wet Pump | Wet |
| Classification Vacuum Pump Technology | Diffusion Pump |
Lubricants
| Default Oil Type | Apiezon® AP201 Vapour Booster Fluid |
- B06403840 - Instructions.pdf - English - Instructions
- P60101460 - Addendum.pdf - English - Instructions
- B06404880 - Instructions.pdf - English - Instructions
- B30301880 - Instructions.pdf - English - Instructions
- B06404883 - Instructions.pdf - French - Instructions
- B06404882 - Instructions.pdf - German - Instructions
- B06404884 - Instructions.pdf - Italian - Instructions
| Product Titel | Onderdeelnummer | Prijs | In winkelwagen |
|---|---|---|---|
| Santovac 5 - Vacuum Pump Oil, 1 x 0.5 l, H11401002 | H11401002 | EUR 3,877.00 | |
| Santovac 5 - Vacuum Pump Oil, 1 x 0.5 l, H02300046 | H02300046 | EUR 4,488.00 | |
| Santovac 5 - Vacuum Pump Oil, 1 x 0.1 l, H02300045 | H02300045 | EUR 1,011.00 | |
| Santovac 5 - Vacuum Pump Oil, 1 x 0.1 l, H11401001 | H11401001 | EUR 1,015.00 |